Vintec V40SG 2e User Manual

1 Armoire à vin. Wine Preservation Technology USER MANUAL V30SG V40SG V50SG V30SG"e"/AL-V30SG"e" V40SG&quo

10 To visualize the “set” temperature, press and hold the UP or DOWN buttons, the “set” temperature will temporarily “flash” in the LED

11 Champagne NV, Sparkling, Spumante 6ºC Dry White Semillon, Sauvignon Blanc 8ºC Champagne Vintage, 10ºC Dry White Chardonnay 10ºC Dry White Gewü

12 DEFROSTING/CONDENSATION/ HYGROMETRY/ VENTILATION Your wine cellar is designed with “Auto-cycle” defrost system. During “Off-cycle” the

13 REVERSIBILITY OF THE DOOR Warning: To avoid accident during the process of changing the door, we recommend that you get assistance. Door is he

14 1 Rubber cover 2 Screw 3 Decorative cover 4 & 7 Screw 5 Top hinge module 6 Door 8 Lower hinge module-Left 9 Cabinet’s leg

15 V40 models (30mm recess plinth) 1 Lock screws 2 Lower hinge (Right) 3 Door axis 4 Top hinge (Righ

16 - Fix the left top hinge and the bottom left hinge with the bolts as per Fig. 4, - Re-install the door the same way it was removed and fix back th

17 V50 models 1 Lock screws 2 Lower hinge (Right) 3 Door axis 4 Top hinge (Right) 5 Door 6 Cabi

18 INSTALLATION INSTRUCTIONS AND DRAWINGS FOR BUILT IN PURPOSES V30 models are free standing only. Any built in voids the war

19 Dimensional drawings: V40’s (30mm recess plinth) V40’s (85mm recess plinth) V50’s Installation instructions 1. Wine Cabinet dimensions

2 WARNING The information in this document is subject to modification without any prior notice. VINTEC offers no guarantee for our wine cellar if

20 3. Please note that a minimum cut out of 625mm is required to facilitate installation, removal and servicing. 4. This wine cabinet

21 Dimensional drawings: OPERATION ANOMALIES Ensure that there is power to the electrical supply plug by connecting another electrical appl

22 Irrespective of the cause, if you notice either abnormal temperature or humidity levels inside your wine cellar, be reassured that only

23 R134A：：：： Technical data Models V30SG V50SG V30SG"e' V40SG"e" V50SG"e" V30SG"2e" V40SG"2e"

24 R600a：：：： Technical data Models AL-V30SG"e' AL-V40SG"e" AL-V30SG"2e" Al-V40SG"2e" AL-V40DG"2e"

25 Standard features: Compressor operated: R134a or R600a - Available in rated voltage/frequency (as per country's requirements): 100V/

26 Copyright: All rights are reserved. All photocopying, reproduction, translation whether partial or total

3 It is hazardous for anyone other than an Authorised Service Person to carry out servicing or repairs to this appliance. In Qu

4 Notes: - V30 models are for free standing ONLY: - V40 models are built-in type as per the drawings thereafter; - V50 models are partially buil

5 IMPORTANT - THIS SPACER MUST BE ATTACHED TO THE UNIT BEFORE INSTALLATION FOR VENTILATION PURPOSE. FAILURE TO DO SO VOIDS THE WARRANTY TURNING

6 Operating Noises To reach the desired temperature settings, VINTEC wine cellars, like all wine cellars operating with compressors and f

7 TYPES OF REGULATION Please note that depending on the loading and settings chosen it takes 24hours for the wine cellar to see the temperature stab

8 TEMPERATURE SETTINGS Important: The LCD displays by default the actual internal air temperature. The temperature settings are pre-set at th

9 To modify the pre-set temperature of standard models: Circumrotate the knob, The knob mark is the temperature pre-set area. A clockwise turn sets a